HS series overview
All the models in the HS range can apply labels at a rate of over 3000/min or 200,000/hour dependent on label length.
The HS (High Speed) labeller has a maximum dispense speed of 100m/min (4000"/min)
The VHS (Very High Speed) labeller has a maximum dispense speed of 150m/min (or 200m/min via a software upgrade)
The UHS (Ultra High Speed) labeller has a maximum dispense speed of 375m/min (15,000"/min)
Not only are the HS series labellers fast, they are accurate, with placement accuracy of +/- 0.4mm (+/- 1/64"). This level of placement accuracy is maintained even when the line ramps from stand-still to production speed and back again so with the HS series labellers there is no reject product through inaccurate labelling everytime the production line is stopped or started.
The HS labellers consist of two separable units - the dispense unit and the loop-box unit. The loop-box unit provides a zero-tension supply of labels to the dispense unit. The two units can be joined together together to form a single compact labelling machine but where space is very limited the two units can be separated and operated as even more compact stand-alone units. When an alternative zero tension supply of labels is available, such as a nearby source of fan-folded labels, the loop-box unit is not required.
All the HS series labellers have a common user interface and most of the mechanical and electrical components are common to all models meaning one model can quickly and easily be upgraded to the next model in the range should requirements demand it.
